Technical Information & Details for Enertex LED PowerSupply 160-12 Output Power: 160 W (up to 300 W in parallel configuration) Output Voltage: 12 V DC (adjustable from 12.0 V to 14.25 V via rotary switch) Output Current: Max. 13.3 A (@ 12 V) Input Voltage Range: 230 V AC, 50 Hz Efficiency: Up to 93% Ripple & Noise: Optimized for PWM dimming via high-capacity output capacitors Inrush Current: Max. mains current 0.78 A No-load Power Consumption: typ. 0.1 W (Standby) Operating Temperature: −5 °C to +45 °C Cooling: Natural convection (DIN rail cabinet mounting) Protection Functions: Short circuit, Overload, Over-temperature (self-healing) Overvoltage Category: OVC III Isolation Voltage: 4 kV AC between input and output Dimensions (H x W x D): 90 mm x 72 mm (4 SU) x 63 mm Weight: approx. 350 g Safety & EMC Certificates: CE, IEC 61347-2-13, DIN EN 55015, EN 61547 LED Indicators: Power (green), Normal Load (CV mode), Max Load (CC mode) Manufacturer Warranty: 2 Years Information about the Enertex LED PowerSupply 160-12 The Enertex LED PowerSupply 160-12 is a professional-grade power solution housed in a compact 4 SU DIN-rail enclosure, engineered specifically to drive 12 V LED strips and lamps with maximum stability. One of its unique competitive advantages is the integrated 11-step rotary switch, which allows users to increase the output voltage in 0.25 V increments up to 14.25 V. This feature is crucial for compensating for voltage drops across long cable runs—up to 50 meters—ensuring that the LED light source receives the exact voltage required for optimal brightness. Furthermore, its oversized output capacitors make it the ideal choice for high-frequency PWM dimming, preventing audible noise and electrical instability during rapid load switching. Beyond standard performance, this unit supports parallel operation of up to two units, allowing for a combined total output of 300 W with active, symmetrical load sharing within a 10% tolerance. Efficiency is at the core of its design, boasting a peak efficiency of 93% and a negligible standby power of only 0.1 W, significantly exceeding standard industrial requirements. Safety is prioritized through Overvoltage Category III compliance and a self-healing thermal protection system that automatically restarts the unit once environmental conditions stabilize. The sophisticated triple-LED diagnostic system provides real-time feedback on whether the unit is operating in constant voltage (CV) or constant current (CC) mode, offering unparalleled transparency for system maintenance and troubleshooting.

Technical Information & Details for the Enertex LED PowerSupply 160-24 Output Power: 160 W Output Voltage: 24 – 28.5 V DC (adjustable) Output Current: 6.6 A (at 24 V) Input Voltage Range: 230 V AC, 50 Hz Efficiency: up to 94.5% (80 PLUS Gold certified) Ripple & Noise: Optimized for PWM dimming via large output capacitors Inrush Current: 0.76 A max. (Mains current) No-load Power Consumption: typ. 0.1 W (Standby) Operating Temperature: −5 °C to +45 °C Cooling: Fanless via optimized housing design Protection Functions: Short circuit, Overload, Over-temperature (self-healing) Overvoltage Category: OVC III Isolation Voltage: 4000 V AC (Input-Output) Dimensions (H x W x D): 90 mm x 72 mm (4 HP) x 63 mm Weight: approx. 350 g Safety & EMC Certificates: CE, IEC 61347-2-13, DIN EN 55015, EN 61547 LED Indicators: Power (green), Normal Load (green), Max Load (yellow) Manufacturer Warranty: 2 Years Information regarding the Enertex LED PowerSupply 160-24 The Enertex LED PowerSupply 160-24 is a high-performance DIN rail power supply engineered specifically for the rigorous demands of LED lighting environments. Boasting an exceptional efficiency rate of up to 94.5% and holding the prestigious 80 PLUS Gold certification, it ensures minimal heat generation and maximum energy savings in smart home and industrial cabinets. A unique characteristic of this unit is its sophisticated parallel operation capability; up to three units can be interconnected to deliver a combined output of up to 450 W. The devices automatically detect this configuration and balance the load symmetrically with high precision, providing a scalable and highly reliable power solution for extensive lighting installations. Precision control is a cornerstone of this power supply, featuring an integrated rotary switch that allows users to adjust the output voltage in 0.5 V increments up to 28.5 V. This functionality is crucial for compensating for voltage drops across long cable runs, ensuring that LEDs receive the exact voltage required for optimal brightness and longevity. Furthermore, the unit is equipped with long-life output capacitors specifically designed to handle the high-frequency switching of PWM dimmers, resulting in superior light quality without flickering. All protective measures, including short-circuit and thermal protection, are fully automated and self-resetting, which guarantees continuous operation and reduces the need for manual intervention after temporary faults.

Technical Information & Details for the Enertex LED PowerSupply 160-48 Output Power: 160 W Output Voltage: 48 – 57 V DC (SELV) Output Current: 3.33 A (@ 48 V) Input Voltage Range: 230 V AC, 50 Hz Efficiency: up to 94.5 % Ripple & Noise: Optimized for PWM dimming Inrush Current: Max. 2 units on B16 / 3 units on C16 circuit breaker No-load Power Consumption: typ. 0.3 W (Standby) Operating Temperature: −5 °C to +45 °C Cooling: Fanless natural convection Protections: Short circuit, Overload, Over-temperature (self-healing) Overvoltage Category: OVC III Isolation Voltage: 4 kV AC (Input-Output) Dimensions (H x W x D): 90 mm x 72 mm x 63 mm (4 SU) Weight: approx. 350 g Safety & EMC Certificates: CE, IEC 61347-2-13, DIN EN 55015, EN 61547 LED Indicators: Power (green), Normal Load (green), Max Load (yellow) Manufacturer Warranty: 2 Years Information about the Enertex LED PowerSupply 160-48 The Enertex LED PowerSupply 160-48 is a high-performance power supply unit designed for DIN rail mounting (4 SU), specifically engineered to power 48 V LED lighting systems. It sets industry standards with a peak efficiency of 94.5% and a remarkably low standby power consumption of only 0.3 W, ensuring sustainable and cost-effective operation. Equipped with large-capacity, long-life output capacitors, this unit is perfectly optimized for PWM-controlled LED dimmers, providing flicker-free performance and maintaining high stability even during rapid dimming cycles or complex lighting scenarios. One of the unique characteristics of this power supply is the integrated rotary switch, which allows users to adjust the output voltage in 1 V increments up to 57 V. This feature is crucial for compensating for voltage drops over long cable runs of up to 50 meters, ensuring that the light source receives the exact required voltage. Furthermore, the device supports active load sharing, allowing up to three units to be connected in parallel for applications requiring up to 450 W of power. With Overvoltage Category III compliance and self-resetting protection circuits, the Enertex PowerSupply 160-48 offers unmatched reliability and safety for professional smart home and industrial lighting installations.