PB-600-48 Auslaufmodell

Für Trucki Anwendung mit aktueller Firmware In: 90-264VAC 47-63Hz  127-370VDC  Out: 27,6-28,8VDC / programable with SBP-001: 21-42VDC / Max. 1210W / 36A / Eff. 93% / 250x158x67mmTyp. Akku: 120-420Ah Battery Charger

In: 90-264VAC 47-63Hz  127-370VDC  Out: 13,8-14,4VDC /programable with SBP-001: 10,5-21VDC / Max. 1176W / 70A / Eff. 92% / 250x158x67mmTyp. Akku: 240-800Ah Battery Charger

Für Trucki Anwendung mit aktueller Firmware In: 90-264VAC 47-63Hz  127-370VDC  Out: 55,2-57,6VDC /programable with SBP-001: 42~80VDC / Max. 1210W / 18A / Eff. 94% / 250x158x67mmTyp. Akku: 60-210Ah Battery Charger

Technical Information & Details for the MEAN WELL NPB-750-12 Power Supply Output Power: 722.4 W Output Voltage: 12 V DC (adjustable range 10.5 – 21 V) Output Current: 43 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 92% Inrush Current: 50 A @ 230 VAC (cold start) Operating Temperature: −30 °C to +70 °C Cooling: Thermal controlled DC fan for noise reduction Protections: Short circuit, Overload (constant current limiting), Over voltage, Over temperature, Battery under voltage, Battery reverse polarity Isolation Voltage: 3000 V AC input to output Dimensions (L x W x H): 230 mm x 158 mm x 67 mm Weight: approx. 1.84 kg Safety & EMC Certificates: CB, DEKRA BS EN/EN62368-1, BS EN/EN60335-1/-2-29, UL62368-1, J62368-1, EAC TP TC 004 LED Indicator: Multi-LEDs for charging and fault status Interfaces & Control: Built-in CANBus 2.0B, DIP switches for 2/3 stage curves, Remote ON/OFF, Smart programmer interface (SBP-001) Manufacturer Warranty: 3 years Information about the MEAN WELL NPB-750-12 The MEAN WELL NPB-750-12 represents a high-performance benchmark as a 750 W high-reliability intelligent battery charger designed with an ultra-wide auto-ranging output voltage capability. Delivering a maximum output power of 722.4 W at 43 A, this versatile unit is fully compatible with diverse battery chemistries, including lead-acid (Gel, flooded, AGM) and lithium-ion batteries. Its principal strength resides in its fully digital control design, featuring a built-in CANBus 2.0B protocol for advanced real-time monitoring, remote parameter adjustments, and full customization of charging parameters through the DIP switch selection or the optional SBP-001 smart programmer. Built to handle demanding industrial environments, the NPB-750-12 includes intelligent automatic battery voltage detection alongside robust protection mechanisms against short circuits, overvoltage, overtemperature, battery undervoltage, and reverse polarity with complete non-damage safety. The unit features a thermally controlled DC cooling fan that optimizes operating noise while sustaining stable operation across a broad temperature range of -30 °C to +70 °C. Backed by dual safety certifications under ITE IEC/EN/UL62368-1 and household appliance EN60335-1/-2-29 standards, as well as a 3-year manufacturer warranty, it serves as an ideal power charging solution for AGVs, e-mobility, telecommunications backup, and robotics applications.

Technical Information & Details for the MEAN WELL NPB-750-24 Charger Output Power: 756 W Output Voltage: 24 V DC (Adjustable Range 21 – 42 V DC) Output Current: 22.5 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 93% Ripple & Noise: ≤ 240 mVp-p Inrush Current: max. 80 A @ 230 V AC No-Load Power Consumption: < 0.15 W (Remote OFF) Operating Temperature: −30 °C to +70 °C Cooling: Temperature-controlled fan Protections: Short circuit, over voltage, over temperature, battery under voltage, battery reverse polarity Overvoltage Category: OVC II Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 67 mm x 158 mm x 230 mm Weight: approx. 1840 g Safety & EMC Certificates: CB, CE, UKCA, UL/EN 62368-1, EN 60335-1/-2-29 LED Indicator: Multi-color LED status indicator Manufacturer Warranty: 3 years Information about MEAN WELL NPB-750-24 The MEAN WELL NPB-750-24 represents a state-of-the-art generation of intelligent, universal battery chargers delivering a rated power output of 756 Watts, engineered specifically for demanding industrial, commercial, and automation charging applications. A standout core feature of this model is its ultra-wide output voltage range of 21 to 42 V DC, enabling flexible adaptation across various system architectures and battery chemistries, including lead-acid (flooded, Gel, AGM) as well as Lithium-ion and LiFePO4 batteries. Thanks to its built-in CANBus 2.0B communication protocol, the charger seamlessly integrates into digital control networks, empowering users to monitor charging parameters in real-time, dynamically adjust voltage and current remotely, and retrieve detailed operational telemetry. Outstanding versatility is further enhanced by manual DIP switches for selecting pre-programmed 2-stage or 3-stage charging curves, alongside full custom curve programming via the optional SBP-001 programmer. In addition to its unmatched flexibility, the NPB-750-24 excels with an impressive efficiency of up to 93% and a robust, thermally optimized chassis featuring a smart temperature-controlled cooling fan that ensures dependable performance across an extended temperature range of −30 °C to +70 °C. The device includes an innovative auto-ranging feature for automatic battery voltage detection, preventing user setup errors and maximizing overall charging safety. Comprehensive built-in safeguards—such as damage-free battery reverse polarity protection, short circuit, overvoltage, overtemperature, and battery undervoltage protection—guarantee maximum operational security during continuous heavy-duty operation. This professional power solution is completed by dual safety certifications for both industrial (EN 62368-1) and household/charger standards (EN 60335-1/-2-29), backed by a trusted 3-year manufacturer warranty.

For Trucki use with the latest firmware Technical Information & Details for the MEAN WELL NPB-750-48 Charger Output Power: 756 W Output Voltage: 48 V DC (Adjustable Range 42 – 80 V DC) Output Current: 11.3 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 93% Ripple & Noise: ≤ 480 mVp-p Inrush Current: max. 80 A @ 230 V AC No-Load Power Consumption: < 0.15 W (Remote OFF) Operating Temperature: −30 °C to +70 °C Cooling: Temperature-controlled fan Protections: Short circuit, over voltage, over temperature, battery under voltage, battery reverse polarity Overvoltage Category: OVC II Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 67 mm x 158 mm x 230 mm Weight: approx. 1840 g Safety & EMC Certificates: CB, CE, UKCA, UL/EN 62368-1, EN 60335-1/-2-29 LED Indicator: Multi-color LED status indicator Manufacturer Warranty: 3 years Information about MEAN WELL NPB-750-48 The MEAN WELL NPB-750-48 represents a state-of-the-art generation of intelligent, universal battery chargers delivering a rated power output of 756 Watts, engineered specifically for demanding 48V industrial, commercial, and automation charging applications. A standout core feature of this model is its ultra-wide output voltage range of 42 to 80 V DC, enabling flexible adaptation across various system architectures and battery chemistries, including lead-acid (flooded, Gel, AGM) as well as Lithium-ion and LiFePO4 batteries. Thanks to its built-in CANBus 2.0B communication protocol, the charger seamlessly integrates into digital control networks, empowering users to monitor charging parameters in real-time, dynamically adjust voltage and current remotely, and retrieve detailed operational telemetry. Outstanding versatility is further enhanced by manual DIP switches for selecting pre-programmed 2-stage or 3-stage charging curves, alongside full custom curve programming via the optional SBP-001 programmer. In addition to its unmatched flexibility, the NPB-750-48 excels with an impressive efficiency of up to 93% and a robust, thermally optimized chassis featuring a smart temperature-controlled cooling fan that ensures dependable performance across an extended temperature range of −30 °C to +70 °C. The device includes an innovative auto-ranging feature for automatic battery voltage detection, preventing user setup errors and maximizing overall charging safety. Comprehensive built-in safeguards—such as damage-free battery reverse polarity protection, short circuit, overvoltage, overtemperature, and battery undervoltage protection—guarantee maximum operational security during continuous heavy-duty operation. This professional power solution is completed by dual safety certifications for both industrial (EN 62368-1) and household/charger standards (EN 60335-1/-2-29), backed by a trusted 3-year manufacturer warranty.

Technical Information & Details for MEAN WELL NPP-750-12 Power Supply Output Power: 756 W (max. power rating) Output Voltage: 12 V DC (adjustable from 10.5 V to 21 V DC via potentiometer) Output Current: 43 A (adjustable from 21.5 A to 43 A) Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 92% Ripple & Noise: ≤ 180 mVp-p Inrush Current: 50 A @230 VAC (cold start) No-load Power Consumption: < 0.15 W (Remote-OFF function enabled) Operating Temperature: −30 °C to +70 °C Cooling: Thermally controlled DC fan for noise reduction Protections: Short circuit, Overload, Over voltage, Over temperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC (Input/Output), 2000 V AC (Input/FG), 500 V AC (Output/FG) Dimensions (H x W x D): 67 mm x 158 mm x 230 mm Weight: approx. 1840 g Safety & EMC Certificates: CB, DEKRA, UL62368-1, IEC/EN62368-1, IEC/EN60335-1/-2-29, EAC LED Indicator: Dual LED status indicator (Green: Normal / Float stage, Red: Charging / Abnormal) Manufacturer Warranty: 3 Years Information about MEAN WELL NPP-750-12 The MEAN WELL NPP-750-12 stands out as an exceptionally versatile 2-in-1 solution for power supply and battery charging across industrial applications. Delivering up to 756 Watts of maximum power, this high-efficiency unit functions both as a constant voltage DC power supply and an intelligent 3-stage battery charger for lead-acid batteries (flooded, Gel, and AGM). Operating modes can be quickly selected by simply inserting or removing a jumper connector on the front panel. A key strength lies in its **wide voltage and current adjustability**, allowing users to fine-tune the output voltage from **10.5 V to 21 V DC** and output current from **50% to 100%** via built-in potentiometers to suit specific system needs. Designed for demanding operational environments, the unit operates reliably within an extensive temperature range of −30 °C to +70 °C. Thermal performance is optimized by an **integrated smart DC fan**, which automatically adjusts its speed based on internal temperatures to reduce noise generation and extend component longevity. Backed by comprehensive protection mechanisms against short circuit, overload, overvoltage, and overtemperature, alongside dual safety certifications covering both IT/industrial and household/charger standards, the NPP-750-12 is an ideal choice for surveillance systems, industrial automation, radio solution backups, and specialized heavy-duty vehicles.

Technical Information & Details for MEAN WELL NPP-750-24 Power Supply & Charger Output Power: 756 W Output Voltage: 28.8 V DC (Adjustable 21 – 42 V DC) Output Current: 22.5 A (Adjustable 11.25 – 22.5 A) Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: Up to 93% Ripple & Noise: ≤ 300 mVp-p Inrush Current: Max. 25 A @ 115 V AC / 50 A @ 230 V AC No-Load Power Consumption: < 0.15 W (Remote OFF) Operating Temperature: −30 °C to +70 °C Cooling: Temperature-controlled intelligent fan Protections: Short Circuit, Overload, Over Voltage, Over Temperature, Battery Reverse Polarity Overvoltage Category: OVC II Isolation Voltage: 3000 V AC Input to Output Dimensions (H x W x D): 67 mm x 158 mm x 230 mm Weight: Approx. 1840 g Safety & EMC Certificates: CE, UL62368-1, CB, EAC, DEKRA LED Indicator: Power On / Charger Status Indicator Manufacturer Warranty: 3 Years Information about the MEAN WELL NPP-750-24 The MEAN WELL NPP-750-24 stands out as a highly sophisticated 2-in-1 hybrid solution designed to function effortlessly either as a smart 3-stage battery charger or as a high-precision industrial power supply. Users can switch between operating modes instantly by attaching or removing a jumper connector on the front panel. Featuring an ultra-wide voltage adjustment range of 21 V to 42 V DC alongside flexible current control, this unit provides maximum adaptability for lead-acid, gel, and advanced lithium-ion battery setups ranging from 80 Ah to 260 Ah capacity. Furthermore, the built-in variable speed smart fan ensures optimal thermal management while maintaining quiet operation under varying load conditions. Delivering exceptional energy efficiency of up to 93%, the NPP-750 series is engineered for continuous high-performance reliability across demanding environments from −30 °C to +70 °C. Comprehensive protective circuitry—including battery reverse polarity protection, short circuit prevention, and thermal shutdown—safeguards both the unit and connected equipment against operational faults. Enhanced by practical control features such as Remote ON/OFF functionality and built-in TTL status signals for Power OK and Battery Full, this compact and versatile power unit is the ideal choice for AGVs, telecommunications, emergency power backup systems, and industrial automation.

Technical Information & Details for the MEAN WELL NPP-1200-48 Power Supply & Charger Output Power: 1209.6 W Output Voltage: 48 V DC (adjustable 42 – 80 V) Output Current: 18 A (adjustable 9 – 18 A) Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 93.5% Ripple & Noise: ≤ 480 mVp-p (in Power supply mode) Inrush Current: max. 50 A @230 VAC (Cold start) No-load Power Consumption: Low power consumption with Remote ON-OFF control Operating Temperature: −30 °C to +70 °C Cooling: thermo-controlled DC fan Protections: Short circuit, overload, overvoltage, overtemperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC (Input/Output), 2000 V AC (Input/FG), 500 V AC (Output/FG) Dimensions (H x W x D): 67 mm x 158 mm x 250 mm Weight: approx. 1930 g Safety & EMC Certificates: CB, DEKRA, UL62368-1, BS EN/EN62368-1, BS EN/EN60335-1/2-29, EAC, CE LED Indicator: Dual-color LED status indicator (Green / Red) Manufacturer Warranty: 3 Years Information about the MEAN WELL NPP-1200-48 The MEAN WELL NPP-1200-48 is a highly advanced 2-in-1 multi-purpose unit designed to operate either as an intelligent 3-stage battery charger for lead-acid and lithium-ion batteries or as a high-performance constant voltage power supply. Its key advantage is the seamless mode switching achieved simply by attaching or removing a jumper connector on the front panel. Featuring an ultra-wide output voltage range of 42 V to 80 V alongside built-in potentiometers for continuous voltage and current adjustment, this unit offers exceptional versatility for custom charging profiles and industrial loads. Delivering up to 1209.6 W of power with a high efficiency up to 93.5% and a universal input range of 90 to 264 V AC, it provides reliable energy delivery for radio system backups, surveillance networks, industrial automation, and specialty vehicles. Engineered for harsh operating environments, the device incorporates comprehensive protection against short circuits, overloads, overvoltages, and overtemperatures, while complying with dual safety standards IEC/EN/UL62368-1 and EN60335-1/-2-29. An intelligent, temperature-controlled DC fan dynamically adjusts speed to minimize operational noise and extend fan life across a wide operating temperature range of -30 °C to +70 °C. Enhanced functionality including remote ON/OFF control, isolated TTL status signals ("Charger OK" / "DC OK" / "Battery Full"), and an optional carry handle make field deployment straightforward. This outstanding build quality and long-term operational dependability are backed by a full 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NPP-1200-12 Power Supply & Charger Output Power: 1176 W (Charger mode) / 1029 W (Power supply mode) Output Voltage: 12 V DC (adjustable 10.5 – 21 V) Output Current: 70 A (adjustable 35 – 70 A) Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 92% Ripple & Noise: ≤ 180 mVp-p (in Power supply mode) Inrush Current: max. 50 A @230 VAC (Cold start) No-load Power Consumption: Low power consumption with Remote ON-OFF control Operating Temperature: −30 °C to +70 °C Cooling: thermo-controlled DC fan Protections: Short circuit, overload, overvoltage, overtemperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC (Input/Output), 2000 V AC (Input/FG), 500 V AC (Output/FG) Dimensions (H x W x D): 67 mm x 158 mm x 250 mm Weight: approx. 1930 g Safety & EMC Certificates: CB, DEKRA, UL62368-1, BS EN/EN62368-1, BS EN/EN60335-1/2-29, EAC, CE LED Indicator: Dual-color LED status indicator (Green / Red) Manufacturer Warranty: 3 Years Information about the MEAN WELL NPP-1200-12 The MEAN WELL NPP-1200-12 is a highly advanced 2-in-1 multi-purpose unit designed to operate either as an intelligent 3-stage battery charger for lead-acid batteries or as a high-performance constant voltage power supply. Its key advantage is the seamless mode switching achieved simply by attaching or removing a jumper connector on the front panel. Featuring an ultra-wide output voltage range of 10.5 V to 21 V alongside built-in potentiometers for continuous voltage and current adjustment, this unit offers exceptional versatility for custom charging profiles and industrial loads. Delivering up to 1176 W of power with a high efficiency up to 92% and a universal input range of 90 to 264 V AC, it provides reliable energy delivery for radio system backups, surveillance networks, industrial automation, and specialty vehicles. Engineered for harsh operating environments, the device incorporates comprehensive protection against short circuits, overloads, overvoltages, and overtemperatures, while complying with dual safety standards IEC/EN/UL62368-1 and EN60335-1/-2-29. An intelligent, temperature-controlled DC fan dynamically adjusts speed to minimize operational noise and extend fan life across a wide operating temperature range of -30 °C to +70 °C. Enhanced functionality including remote ON/OFF control, isolated TTL status signals ("Charger OK" / "DC OK" / "Battery Full"), and an optional carry handle make field deployment straightforward. This outstanding build quality and long-term operational dependability are backed by a full 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NPP-1200-24 Power Supply & Charger Output Power: 1209.6 W Output Voltage: 24 V DC (adjustable 21 – 42 V) Output Current: 36 A (adjustable 18 – 36 A) Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 93% Ripple & Noise: ≤ 300 mVp-p (in Power supply mode) Inrush Current: max. 50 A @230 VAC (Cold start) No-load Power Consumption: Low power consumption with Remote ON-OFF control Operating Temperature: −30 °C to +70 °C Cooling: thermo-controlled DC fan Protections: Short circuit, overload, overvoltage, overtemperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC (Input/Output), 2000 V AC (Input/FG), 500 V AC (Output/FG) Dimensions (H x W x D): 67 mm x 158 mm x 250 mm Weight: approx. 1930 g Safety & EMC Certificates: CB, DEKRA, UL62368-1, BS EN/EN62368-1, BS EN/EN60335-1/2-29, EAC, CE LED Indicator: Dual-color LED status indicator (Green / Red) Manufacturer Warranty: 3 Years Information about the MEAN WELL NPP-1200-24 The MEAN WELL NPP-1200-24 is a highly advanced 2-in-1 multi-purpose unit designed to operate either as an intelligent 3-stage battery charger for lead-acid batteries or as a high-performance constant voltage power supply. Its key advantage is the seamless mode switching achieved simply by attaching or removing a jumper connector on the front panel. Featuring an ultra-wide output voltage range of 21 V to 42 V alongside built-in potentiometers for continuous voltage and current adjustment, this unit offers exceptional versatility for custom charging profiles and industrial loads. Delivering up to 1209.6 W of power with a high efficiency up to 93% and a universal input range of 90 to 264 V AC, it provides reliable energy delivery for radio system backups, surveillance networks, industrial automation, and specialty vehicles. Engineered for harsh operating environments, the device incorporates comprehensive protection against short circuits, overloads, overvoltages, and overtemperatures, while complying with dual safety standards IEC/EN/UL62368-1 and EN60335-1/-2-29. An intelligent, temperature-controlled DC fan dynamically adjusts speed to minimize operational noise and extend fan life across a wide operating temperature range of -30 °C to +70 °C. Enhanced functionality including remote ON/OFF control, isolated TTL status signals ("Charger OK" / "DC OK" / "Battery Full"), and an optional carry handle make field deployment straightforward. This outstanding build quality and long-term operational dependability are backed by a full 3-year manufacturer warranty.

Technical Specifications & Details for MEAN WELL NPP-750-48 Power Supply Output Power: 720 W Output Voltage: 54.4 V DC (Adjustable 42 – 80 V) Output Current: 13.3 A (Adjustable 6.7 – 13.3 A) Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: Up to 93% Ripple & Noise: ≤ 480 mVp-p Inrush Current: Max. 50 A @ 230 VAC Operating Temperature: −30 °C to +70 °C Cooling: Thermally controlled DC fan Protections: Short circuit, Overload, Over voltage, Over temperature Isolation Voltage: 3000 V AC Input-to-Output Dimensions (L x W x H): 230 mm x 158 mm x 67 mm Weight: Approx. 1.84 kg Safety & EMC Certificates: CB, DEKRA, UL62368-1, EN60335-1/-2-29, EAC, CE LED Indicator: Dual-color status LED (Green / Red) Manufacturer Warranty: 3 Years Information About the MEAN WELL NPP-750-48 The MEAN WELL NPP-750-48 establishes a high benchmark as an advanced 2-in-1 multi-purpose unit that seamlessly converts between a 3-stage battery charger and a constant voltage power supply. By simply inserting or removing a jumper connector on the front panel, operators can immediately toggle between operating modes. Delivering 720 Watts of power with an adjustable output voltage range of 42 to 80 Volts and a configurable current range from 6.7 to 13.3 Amps, this unit provides outstanding flexibility for 48V lead-acid battery maintenance (flooded, Gel, AGM) as well as direct industrial DC loads. Engineered for high-demand environments, the NPP-750-48 features a wide operating temperature envelope spanning -30 °C to +70 °C alongside a superior energy efficiency rating of up to 93%. A built-in smart thermal-controlled DC fan automatically adjusts its speed according to internal temperatures, effectively lowering acoustic noise and extending fan longevity. The power supply also integrates essential control capabilities such as Remote ON-OFF control, TTL status output signals for DC OK / Charger OK, and full electronic protection against short circuit, overload, over voltage, and over temperature. Backed by dual safety compliance across IEC/EN/UL62368-1 and EN60335-1/-2-29 standards, it is reinforced with a dependable 3-year manufacturer warranty.