Technical Information & Details about the MEAN WELL HDR-30-24 Power Supply Output Power: 36 W Output Voltage: 24 V DC Output Current: 1.5 A Current Range: 0 – 1.5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 89 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21.6 – 29 V DC Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 35 mm x 90 mm x 54.5 mm Weight: approx. 130 g Housing Material: insulating plastic, Class II Mounting: DIN rail TS35/7.5 or TS35/15 Safety & EMC Certifications: UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, IEC 62368-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-30-24 The MEAN WELL HDR-30-24 is a 30 W ultra-slim DIN-rail power supply that provides a stable 24 V DC / 1.5 A output in a narrow 35 mm (2 SU) housing, ideal for compact distribution boards and space-saving control cabinets. With its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 89 %, it offers an energy-efficient 24 V control voltage source for building automation, home automation, and light industrial control systems. The adjustable 21.6–29 V output range allows precise tuning of the 24 V bus to compensate for voltage drops across wiring runs and to supply PLCs, sensors, relays, and I/O modules with reliable power. Its Class II plastic enclosure provides double insulation for enhanced user safety and simplifies installation by eliminating the need for a protective earth connection. Fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features make the HDR-30-24 a robust, long-life 24 V power solution for household and industrial automation applications.

Technical Information & Details of the MEAN WELL HDR-15-12 Power Supply Output Power: 15 W Output Voltage: 12 V DC Output Current: 1.25 A Output Current Range: 0 – 1.25 A Output Voltage Adjustment Range: 10.8 – 13.8 V DC Ripple & Noise: ≤ 120 mVp-p Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational) Input Frequency: 47 – 63 Hz Efficiency (typ.): 85 % AC Input Current (typ.): 0.5 A @115 V AC / 0.25 A @230 V AC Inrush Current (typ.): 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Overload Protection: 110 – 145 % of rated power, constant current limiting within 50 – 100 % of rated output voltage, hiccup mode when Vout < 50 %, auto recovery Overvoltage Protection: 14.2 – 16.2 V DC, shut off output, clamping by zener diode Operating Temperature: −30 °C to +70 °C (derating according to curve) Operating Humidity: 20 – 90 % RH, non-condensing Storage Temperature / Humidity: −40 °C to +85 °C, 10 – 95 % RH, non-condensing Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 2 G, 10 min./cycle, 60 min. per axis (X, Y, Z) Operating Altitude: up to 2,000 m (derating above 2,000 m) Isolation Voltage: 4 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Dimensions (W x H x D): 17.5 mm x 90 mm x 54.5 mm Weight: approx. 74 g Mounting: DIN rail TS35/7.5 or TS35/15, ultra-slim 1-SU step-shape housing Housing / Isolation Class: plastic housing, isolation Class II, LPS (Limited Power Source) Front Indicators / Controls: LED indicator for power on, adjustable DC output voltage Safety Approvals: UL62368‑1, UL508, TUV BS EN/EN61558‑2‑16, BS EN/EN61558‑1, IEC62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252 (Part1) (except 48 V) EMC Emission: EN55032 (CISPR32), CNS15936 Class B; EN61000‑3‑2, EN61000‑3‑3 EMC Immunity: EN55035, EN61000‑6‑2, EN61204‑3; EN61000‑4‑2/3/4/5/6/8/11 MTBF (typ.): 3,724,300 h (Telcordia SR‑332, 25 °C) / 1,166,100 h (MIL‑HDBK‑217F, 25 °C) Warranty: 3 years Information about the MEAN WELL HDR-15-12 The MEAN WELL HDR‑15‑12 is a slim 15 W DIN rail power supply providing 12 V DC at up to 1.25 A, built in an ultra‑compact 17.5 mm (1 SU) plastic enclosure for space‑saving installations on TS35/7.5 or TS35/15 rails. Its wide 85–264 V AC input (with 277 V AC operational) and adjustable 12 V output range from 10.8 to 13.8 V make it suitable for a variety of 12 V control, sensor and logic applications in household and industrial environments. Thanks to a typical efficiency of 85 % and fanless convection cooling, the HDR‑15‑12 operates from −30 °C to +70 °C when derating is applied, which is ideal for compact distribution boards and building automation panels. With constant‑current overload protection, overvoltage shutdown, low no‑load power consumption and a comprehensive set of safety and EMC certifications, it offers a cost‑effective and standards‑compliant 12 V DIN rail supply for household control systems, building automation and small industrial control systems.

Technical Information & Details for MEAN WELL AD-155C Power Supply Output Power: 151.55 W (CH1: 53.5 V / 2.7 A, CH2: 54 V / 0.5 A) Output Voltage: CH1: 53.5 V DC (48–58 V adjustable), CH2: 54 V DC Output Current: CH1: 0–2.7 A, CH2: 0–0.5 A Input Voltage Range: 88 – 264 V AC / 124 – 370 V DC, 47 – 63 Hz Efficiency: 84% Ripple & Noise: 240 mVp-p Inrush Current: Cold Start 23 A @ 115 VAC / 45 A @ 230 VAC Power Factor (PFC): PF > 0.92 at full load Operating Temperature: −10 °C to +60 °C Cooling: Free air convection (expandable via 21.6 CFM forced air) Protections: Short circuit, Overload, Over voltage, Battery low shutdown, Battery polarity protection Isolation Voltage: 3000 V AC between Input and Output (I/P-O/P) Dimensions (L x W x H): 199 mm x 110 mm x 50 mm Weight: approx. 880 g Safety & EMC Certifications: UL62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004, BS EN/EN55032 Class B LED Indicator: Power On Indicator Warranty: 2 Years Information about MEAN WELL AD-155C Designed to support 48 V nominal systems without the need for discrete charging management hardware, the MEAN WELL AD-155C replaces cumbersome legacy multi-component setups. Functioning as a high-voltage dual-output power unit with integrated battery charger (UPS function), it supplies 53.5 V DC main output alongside a secondary 54 V battery line. Incorporating modern active Power Factor Correction (PFC > 0.92), the module optimizes operational energy efficiency while outperforming older uncorrected power supplies. Safety is enhanced through targeted battery polarity and low-battery protection features that guard external battery banks against permanent discharge damage. This makes the AD-155C model an outstanding choice for telecom racks, PoE power distribution, emergency communication networks, and critical industrial automation.

Technical Information & Details for MEAN WELL HEP-600C-24 Power Supply Output Power: 604.8 W (Boost charging power) Output Voltage (Boost / Float): 28.8 V DC / 27.2 V DC (adjustable 23 – 30.2 V) Output Current: 21 A (adjustable 10.5 – 21 A) Recommended Battery Capacity: 70 – 210 Ah Input Voltage Range: 90 – 264 V AC (277 V AC operational) / 128 – 370 V DC, 47 – 63 Hz Efficiency: 94.5% Inrush Current: 70 A @230 VAC (cold start) No-Load Power Consumption: < 0.5 W at remote OFF Operating Temperature: −40 °C to +70 °C Cooling: Fanless, free air convection (fully potted silicone) Protections: Short circuit, Over voltage, Over temperature Isolation Voltage: 3750 V AC between Input and Output Vibration Resistance: 10G (20 – 500 Hz) Dimensions (L x W x H): 280 mm x 144 mm x 48.5 mm Weight: 3.9 kg Safety & EMC Certificates: UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, BS EN/EN55032 Class A/B LED Indicator: 3-color LED loading indicator (Red / Yellow / Green) Manufacturer Warranty: 6 years Information on MEAN WELL HEP-600C-24 Delivering 21 A output current for 24 V battery setups, the MEAN WELL HEP-600C-24 charger combines high efficiency with industrial-grade potting for demanding outdoor applications. Its rugged fanless chassis withstands severe mechanical shock thanks to a rated vibration resistance of 10G across all axes. Built to operate without interruption, it covers a wide operating temperature range of −40 °C to +70 °C in robotic, marine, and telecommunication deployments. System protection is reinforced by an elevated isolation voltage of 3750 V AC and backed by an industry-leading 6-year manufacturer warranty.

Technical Information & Details of the MEAN WELL NDR-480-24 Power Supply Output Power: 480 W Output Voltage: 24 V DC Output Current: 20 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 92.5 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 60 A @115 VAC / 60 A @230 VAC No-load Power Consumption: < 0.75 W Operating Temperature: −20 °C to +70 °C Cooling: fanless natural convection Protection Features: Short-circuit, Overload, Overvoltage, Overtemperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 125.2 mm x 85.5 mm x 128.5 mm Weight: approx. 1.8 kg Safety & EMC Certificates: CE, UL 508, TUV, CB, EAC LED Indicator: Power On status indicator Manufacturer Warranty: 3 years Information about the MEAN WELL NDR-480-24 The MEAN WELL NDR-480-24 is a high-performance DIN rail power supply with 480 W and stable 24 V DC / 20 A output voltage. It excels with excellent efficiency up to 92.5 %, fanless convection cooling for silent operation, and a powerful aluminum housing design. The comprehensive protection features (short-circuit, overload, overvoltage, and overtemperature protection) with automatic recovery ensure maximum operational safety. Perfect for PLC controls, heavy industrial automation, conveyor systems, and machine building – the universal input voltage range 90–264 V AC enables worldwide deployment. With international certifications, the NDR-480-24 offers maximum energy efficiency, durability, and reliability in demanding industrial environments.

Technical Information & Details for MEAN WELL AD-55B Power Supply Output Power: 51.38 W Output Voltage: CH1: 27.6 V DC, CH2: 26.5 V DC Output Current: CH1: 0–1.8 A, CH2: 0–0.16 A Input Voltage Range: 88 – 264 V AC / 124 – 370 V DC, 47 – 63 Hz Efficiency: 71% Ripple & Noise: ≤ 100 mVp-p Inrush Current: max. 20 A @ 115 V AC / 40 A @ 230 V AC (Cold start) No-load Power Consumption: Not specified Operating Temperature: −10 °C to +60 °C Cooling: Free air convection (fanless) Protections: Short circuit, Overload, Over voltage, Battery low protection Overvoltage Category: Not specified Isolation Voltage: 3000 V AC between Input and Output Dimensions (L x W x H): 159 mm x 97 mm x 38 mm Weight: approx. 500 g Safety & EMC Certificates: UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, CE LED Indicator: None Manufacturer Warranty: 2 years Information on MEAN WELL AD-55B Tailored for nominal 24V applications, the MEAN WELL AD-55B functions as a dual-channel power solution equipped with UPS battery charging capability to prevent operational downtime during grid power loss. It delivers a 27.6 V main channel for system equipment alongside a dedicated 26.5 V backup battery output featuring integrated battery low protection to safeguard cells from deep discharge. High operational reliability is supported by a 3000 V AC isolation rating and compliance with international standards such as UL62368-1 and TUV EN62368-1, making it an ideal choice for emergency power, security networks, and DC backup panels.